WALKTHROUGH METAL DETECTOR MULTI-ZONE WITH 33 ZONES INDOOR

CONTROL UNIT

• Shockproof thermo-moulded ABS case (IP20).
• Automatic Feeder with input voltage 100-240Vac / 50-60Hz, 30W max.
• Sampling frequency from 3 kHz to 8 kHz.
• Temperature range: -20°C to +70°C.
• Non condensed relative humidity 0 – 95%.
• Access to the front panel protected by mechanical lock and password on two levels (user – Super User).
• Programming via keypad.
• Direct selection of international safety standards by the programming menu.
• Storage parameters via solid state memory.
• Incorporated RS232 serial interface board.

STRUCTURE

• The MEG material 4 mm is not subject either to flaking or delamination of the decorative surface. MEG is not hazardous to the health and is non-polluting to the environment. It is composed of 70% by cellulose fibers and of 30% by thermosetting resins; it does not contain asbestos and is free from heavy materials. No emission of gases, vapors, solvents or liquids.
• Waterproof base for fastening on the floor.
• Modular design for easy and quick assembly.

GENERAL SPECIFICATIONS

• Automatic synchronization between two or more metal detectors (with no connecting cables).
• High sensitivity for each zone and independent programming.
• Detection of ferrous, non-ferrous, magnetic, non-magnetic items and of objects made of mixed alloys.
• Uniformity of detection throughout the internal volume of the passage.
• Excellent discrimination between personal items and weapons.
• High immunity to mechanical interference and electromagnetic noise (X-ray systems monitors, CCTV horizontal synchronization, etc.).
• Visual indication proportional to the mass of metal detected (under and above the threshold).
• General external background noise measurement proportional to the threshold set.
• External electromagnetic noise measurement proportional to the threshold set.
• It requires no initial or periodic calibration.
• Adjustable Sensitivity level.
• Adjustable Amplification levels.
• Manual frequency searching values.
• Targeted programs, favoring the most diverse installation requirements.
• Filters inserting by programming.

ALARM INDICATORS

• Visual alarm through Red LED and LCD.
• Audible alarm adjustable in duration, frequency and tone.
• Visual indicator of alarm status and operating status.
• Visual indicator for Battery feed.
• Led bar indicator with discrimination of 11 vertical zones and 3 horizontal to show alarm position.
• Stop/Go signaling (Red/Green).
• Alarm indicator visible from both sides of the gate and configurable according to the operator’s choice.
• Infrared sensors for step counter.

OPTIONS

• Metal samples test (OTP). Designed according to the standards FAA 3.
• Remote signaling unit.
• Wheel mobility kit.

CERTIFICATIONS

• Harmless to magnetic supports (floppy disk, tapes, credit cards, etc).
• Complies with Regulations relating to human exposure to electromagnetic fields and safety for pacemaker users.
• In compliance with NILECJ-0601.02 standards all levels.
• In compliance with “3 GUN TEST” FAA standards.
• In compliance with CE standards.
• ISO9001 Quality Control Procedures.